Electrical of Cable-online

Single line centralized lubrication system, lubrication system introduced single-wire system, single line centralized lubrication system described is a highly reliable, full-automatic monitoring performance, advanced the ideal lubrication devices, has the following characteristics:
1, the composition point of view from the lubrication system by the two-cycle oil pipeline to a single line holding pressure oil, to overcome the two-lane system in the alternate oil and pipeline for the power to the relief process waste.
2, may be different depending on the device the fuel consumption of lubrication points, any combination of the distributor into the most appropriate to achieve a quantitative way to the oil program.
3, in-line centralized lubrication device also comes with a variety of self-control protection device consisting of a high degree of system automation, reliable and durable.
4, the system piping is simple, compact and provincial timber, small investment.
Lubrication system components
A. Automatic lubrication pump control
1, in accordance with the mechanical cycle of action-related or mechanical interlocking means.
2, the manner determined by the timer.
3, the cycle count of the number of indicator movement control.
B. central alarm signal
As long as no one in the device blocking occurs immediately when the alarm. This may be light or alarm buzzer.
C. pro-distributor
1, use the KM type or KL-based distributor
2, the role of pro-splitter: Upon receipt of all the oil from the pump to output after the action depend on the order of the piston can be correctly sent to the second row of the required fuel distributor. D. Cycle Indicator
Reciprocating motion cycle indicator that the device works (oil gun or automatic counting operation requires the use of) E. clogging indicator
The role of clogging indicator that jammed the place.
  plug reset indicator: Pointer overpressure plug points emerge.
  Automatic Overflow indicator: blocked automatically spill over pressure points. Single lubrication system oil several common ways to
1, the oil gun mode
Use gun oil to the oil, up to a unit composed by the eight intermediates, so up to 16 lubrication points to the oil supply. First is to calculate the bearing needs oil, select the appropriate intermediate, with that cycle indicator that the end to the oil. Since replacing the lubrication oil pump gun, so equipment prices low. The amount of energy scheduled to oil, will not be wasted, in the few occasions the use of lubrication points, very economic.
2, Manual lubrication pump mode
Lubrication pump with a single hand can point to more than 100 oil lubrication. Use of the oil pump on the back end indicator indicates to the oil.
Even if the 100 is a point not within the oil, the shake was difficult when the pump handle, such as the re vigorously pulled, the pressure will rise, up to 20MPa, more than the pump valve of the body of the sheet sheet will break to protect the safety of the pump. Then check the plug on the pro-distributor indicator, the indicator plunger out of a pipe in the top of clogging.
The maximum discharge of oil pump pressure 20MPa, so even the high back pressure in the bearing can be lubricated sufficiently.
Constitute a manual lubrication pump dispenser 2 3 sub-distributor pro-

3 way electric lubrication pump
As with the pressure switch, low oil level switch, loop switches and other alarm devices, and rely on electronic control box, can be completely automated.
Oil discharge pressure of 20MPa, ranked according to the design used to determine oil, this approach is widely used in various mechanical devices.
Electric single multi-point lubrication pump including the pump.
4, barrel cover means mounted pump
Directly mounted on the pump body cover on drums, so easy to install, the dust is very suitable for many occasions, because there is no need to pump oil from oil drums to move, they will not make the dust pump, distributor, bearing by loss.
Drive has two kinds of electric and pneumatic, hydraulic discharge up to 20MPa.
This approach particularly suitable for large-scale machinery, blast furnace, rolling mill and other occasions. Constitute a single pro-distributor of electric lubrication pump 2 3 4 power cycle count switch control box 5 children 6 Sun distributor distributor
5, one way to the oil pump multi-zone
This method is particularly suitable for the oil up to several hundred meters on a rolling machine to use.
By the central pump oil into the F50mm about the director, then director in charge sent to each region, equipped with a charge of electromagnetic valve, solenoid valve through the opening and closing, could periodically be sent to the regional distributor grease, again point to the grease lubrication.
Using this system, thousands of bearings can be used on a central pump to automatically be fat
Constitute a single electrical solenoid valve lubrication pump 2 3 4 cycle counting pro-splitter sub-distributor switch 5 6 7 splitter Sun Oil Gun electronic control box 8